Dasos - Cariboni Group
Dasos
New
Dasos

Urban - Pole Side

Dasos

DASOS, responsible lighting for the urban nightscape that promotes well-being for people and protects nature.

Plus

Design

Design

Designed as a piece of furniture and not just a light fixture, Dasos subverts the classic lines of urban lighting points by becoming furniture even when not in use.

Dasos System
Flexibility

Flexibility

By varying the number, size, and height of the light points, it is possible to obtain the system that suits every design requirement.

Dasos System
Visual comfort

Visual comfort

The lamp incorporates BLOS optics that combine geometric control shielding and advanced optical modeling, limiting the maximum perceptible luminance and direct illumination to the eye in critical directions. Ideal for pedestrian areas, it guarantees high visual comfort and limits non-functional emissions.

Find out more here.

Dasos System
Eco-Centric Lighting

Eco-Centric Lighting

Controlling the spatial distribution of light, combined with the use of sources with reduced blue content, reduces the effects of artificial night lighting on ecosystems. Limiting emissions upwards and in non-functional directions preserves environmental darkness and reduces the disorientation of nocturnal pollinators.

Dasos System
Dynamic White Light

Dynamic White Light

With Dynamic White Light optical systems, the spectral distribution of white light can be adjusted from very warm tones to cooler tones. In addition to color modulation, it is also possible to adjust the intensity of the light flux at different color temperatures.

Find out more here.

Dasos System
Dasos System
IoT ready

IoT ready

Dasos is available with standard Zhaga (Book18) or NEMA (ANSI C 136.41) interfaces. An interface is the mechanical and electrical system that allows sensors and control nodes to be connected to the lamps.

Dasos System
Easy to install

Easy to install

Dasos' front clip allows easier opening without the use of tools.

The presence of the automatic disconnector facilitates safe maintenance.

Dasos System
RECYCLABLE

RECYCLABLE

The main materials used to make the product are recyclable and easily separable for separate disposal. No adhesives have been used to assemble the product.
REPAIRABLE

REPAIRABLE

The source and power supply unit can be replaced for maintenance and to update the product in order to extend its service life.
DURABLE

DURABLE

The product is robust and reliable. Components, materials and finishes have been chosen to last a long time and resist corrosion, voltage surges and impact.

Dasos Brochure

Dasos Brochure

Optics

Weight

6.7 kg, 8.5 kg

Labels and certifications

CE, ENEC pending

MV_Virtual Midnight

Custom programmable virtual midnight self-learning

MV_Virtual Midnight
Virtual midnight is a control technique integrated into each lamp, which does not require additional wiring or external devices. The programming, defined with the customer and set at the factory, allows a percentage reduction in luminous flux and power consumption during low-traffic hours. The operating profile can be modified by qualified personnel on each individual light point.

FROM_DALI

DA_DALI Wired

FROM_DALI
Communication takes place via a dedicated two-pole connection, on a separate cable or integrated into the power cable. For distances greater than 200 m, the use of extenders is recommended. Response times are fast, up to 0.2 s.

FROM_DALI

DA_DALI Wireless

FROM_DALI
The DALI Wireless system eliminates the need for dedicated physical wiring: commands are transmitted via radio waves. Installation is simplified, with a transmitter and one or more receivers positioned up to 150 m apart in free air.

DA_DALI + Zhaga 18

DA_DALI Wireless (Zhaga 18)

DA_DALI + Zhaga 18
The DALI Wireless system eliminates the need for dedicated physical wiring: commands are transmitted via radio waves thanks to Zhaga 18 control nodes installed on the top of the lamp.

Sensors

Sensors
The luminous flux of the lamps can be adjusted using detection systems that can be connected to control lines, allowing advanced lighting management based on parameters such as the presence of people or natural lighting levels.

ZHAGA 18

ZHAGA 18
The Zhaga connector uses the D4i (DALI for IoT) communication protocol, ensuring interoperability and compatibility between devices from different manufacturers. Lamps can be equipped with a connector on the top or bottom, or on both sides (UP/DOWN or UP & DOWN). Zhaga connectors allow for quick and easy plug & play integration of smart sensors, control nodes, or IoT devices at any time.

NEMA (ANSI C 136.41)

NEMA (ANSI C 136.41)
NEMA sockets allow direct connection of photocells, sensors, and control nodes, offering a simple and robust solution, albeit without standardization for smart data transmission.

PLC_Conveyed waves

Wireless Remote Management

PLC_Conveyed waves
Power line communication technology allows data to be transmitted via existing power cables, without the need for dedicated wiring. This makes it possible to remotely monitor and manage the consumption profiles of lighting fixtures. Management is synchronized for the entire system, and initial configuration is performed by a qualified operator using a portable programmer.

PLC_Conveyed waves

Control from electrical panel

PLC_Conveyed waves
Power line communication technology allows data to be transmitted via existing power cables, without the need for dedicated wiring. This makes it possible to monitor and manage the consumption profiles of lighting fixtures from the electrical panel. Management is synchronized for the entire system, and the initial configuration is performed by a qualified operator using a portable programmer.

Design data / Download files

Leaf through the catalogue

Discover all our products and their configurations.

Line variations

Related Products